The circumference (or perimeter) of a circle is made of many points that are all the same distance (equidistant) from the centre of the circle.
An arc is part of the circumference of a circle. If the arc is over half of the circumference then it is called a major arc. If it is less than half of the circumference it is called a minor arc.
The diameter cuts the circle exactly in half and goes through the centre.
The radius is half the length of the diameter and is joined to the centre at one end.
A chord is a straight line inside the circle that touches the circumference at 2 points but does not touch the centre of a circle.
A tangent is a straight line outside the circle that touches the circumference at one point only.
A segment is the area enclosed by a chord and an arc (it looks similar to the segment of an orange or grapefruit).
A sector is the area enclosed by 2 radii (radius) and an arc (It looks like a slice of cake or pizza).
Here we will learn about the different parts of a circle including how to identify the key parts of a circle from a diagram, how to identify the key parts of a circle from a definition and how to draw a circle with the different parts labelled e.g. the diameter of a circle.
There are also parts of a circle worksheets based on Edexcel, AQA and OCR exam questions, along with further guidance on where to go next if you’re still stuck.
The parts of a circle are the radius, diameter, circumference, arc, chord, secant, tangent, sector and segment.
Circle terms
Naming circle parts:
Circle
A round plane figure whose boundary consists of points equidistant from a fixed point.
Centre
The centre of the circle is the fixed point from which all points on the boundary of the circle are equidistant.
Often noted on diagrams as ‘O’.
Centre/center are the same. Centre is the UK spelling whilst Center is the US spelling.
Radius
The distance from the centre of a circle to the outside.
The radius of the circle is half the diameter of the circle.
The plural of radius is radii.
Diameter
The distance across the circle going through the centre.
The diameter is twice the radius.
Circumference
The distance once around the circle.
Arc
A part of the circumference.
Major arc – A major arc is greater than half the circumference.
Minor arc – A minor arc is less than half the circumference.
Area
The space inside a 2D shape.
Chord
A line segment going from one point of the circumference to another but does not go through the centre.
Secant
A line that goes through the circle at two points.
Note: Secant is not a term you are required to know at GCSE, however it is important to note the difference between a chord and a secant.
Tangent
A straight line that touches the circle at a single point only.
Sector
A section of the circle created by two radii.
Major sector – A major sector has a central angle which is more than 180^o .
Minor sector – A minor sector has a central angle which is less than 180^o .
Semi circle
Half of a circle. Could be considered a sector where the circle has be split by the diameter.
Quadrant
A quarter of a circle, created by two perpendicular radii.
Segment
A section of the circle created by a chord.
Major segment – a segment where the arc is greater than half the circumference.
Minor segment – a segment where the arc is less than half the circumference.
Other keys terms:
Equidistance
A point is equidistant from 2 other points when it is always the same distance away from those points.
Angles around a point
Angles around a point are equal to 360^o .
In order to identify/label parts of a circle:
1 Identify the key aspects of the part of the circle.
- Is it a line or part of the circle’s area?
- If a line goes through the origin of the circle?
- If a line, is it part of the circle’s circumference?
- If part of the circle’s area is it a segment or sector?
2 Clearly state your answer, consider whether the part of a circle you have identified has a specific name e.g. semicircle, major segment.
Get your free parts of a circle worksheet of 20+ questions and answers. Includes reasoning and applied questions.
DOWNLOAD FREE
Get your free parts of a circle worksheet of 20+ questions and answers. Includes reasoning and applied questions.
DOWNLOAD FREE
Name the part of the circle shown in red in the below diagram.
- Identify the key aspects of the part of the circle. Here are some key questions you can ask yourself?
- Is it a line or part of the circle’s area? Line
- If a line goes through the origin of the circle? Yes
- If a line, is it part of the circle’s circumference? No
2Clearly state your answer, consider whether the part of a circle you have identified has a specific name e.g. major segment.
Radius
Name the part of the circle shown in red in the below diagram.
Identify the key aspects of the part of the circle. Here are some key questions you can ask yourself?
- Is it a line or part of the circle’s area? Part of the area
- If part of the circle’s area is it a segment or sector? Sector as the radii meet at the origin
Clearly state your answer, consider whether the part of a circle you have identified has a specific name e.g. major segment.
Sector – specifically the minor sector.
Identify the key aspects of the part of the circle. Here are some key questions you can ask yourself?
- Is it a line or part of the circle’s area? Line
- If a line goes through the origin of the circle? No
- If a line, is it part of the circle’s circumference? No
Clearly state your answer, consider whether the part of a circle you have identified has a specific name e.g. major segment.
Name the part of the circle shown in red in the below diagram.
Identify the key aspects of the part of the circle. Here are some key questions you can ask yourself?
- Is it a line or part of the circle’s area? Part of the area
- If part of the circle’s area is it a segment or sector? Segment as it is created by a chord
Clearly state your answer, consider whether the part of a circle you have identified has a specific name e.g. major segment.
Segment – specifically the minor segment.
Identify the key aspects of the part of the circle. Here are some key questions you can ask yourself?
- Is it a line or part of the circle’s area? Line
- If a line goes through the origin of the circle? No
- If a line, is it part of the circle’s circumference? No, it touches the circumference of the circle at one point
Clearly state your answer, consider whether the part of a circle you have identified has a specific name e.g. major segment.
On the circle below:
Draw a diameter.
Draw a tangent.
Label the circumference.
Identify the key aspects of the part of the circle.
Here you are being asked to draw the parts on a the given circle so you needs to consider each key term.
Diameter – The distance across the circle going through the centre.
Tangent – A straight line that touches the circle at a single point only.
Circumference – The distance once around the circle.
Clearly state your answer by labeling the diagram given.
- Confusing the Radius/Diameter
The radius is from the centre of the circle to the circumference whilst the diameter goes across the whole circle whilst going through the origin.
- Confusing the Segment/Sector
A segment is made from a chord whilst a sector will have lines (radii) coming from the origin.
HINT: Some students like to consider a sector like a slice of pizza.
- Confusing the Chord/Diameter
A chord will not go through the origin of the circle whilst the diameter will.
- Confusing the Tangent/Secant
A tangent only touches the circumference at a single point, it does not cross the line. A secant will cross the circumference twice.
Practice parts of a circle questions
Middle of the circle (origin)
The ‘o’ refers to the centre of the circle which is called the origin of the circle
The circumference is the distance around the edge of the circle, this will always be longer
The radius is twice the length of the diameter
The diameter is twice the length of the radius
The radius is half the length of the circumference
The diameter is half the length of the circumference
The distance from the centre of the circle to the circumference is called the radius. The distance across the circle passing through the centre is called diameter. This means that the diameter is twice as long as the radius.
Part of a circle’s circumference
A line that goes through a circle
A sector consists of the area created by an arc and two radii
Parts of a circle GCSE questions
1. Name the part of the circle shown in the diagram below:
(1 mark)
2. Name the part of the circle shown in the diagram below:
(1 mark)
3. Name the part of the circle shown in the diagram below:
(1 mark)
4. Name the part of the circle shown in the diagram below:
(1 mark)
5. Name the part of the circle shown in the diagram below:
(1 mark)
6. Name the part of the circle shown in the diagram below:
‘A line that goes across the circle but does not go through the origin’
(1 mark)
7. Molly says ‘A chord is the same as a radius but shorter’. Is Molly correct? Explain your answer
(1 mark)
No, the radius goes from the origin to the circumference. A chord does not touch the origin of the circle
(1)
You have now learned how to:
- Identify and apply circle definitions and properties, including: centre, radius, chord, diameter, circumference (F)
- Identify and apply circle definitions and properties, including tangent, arc, sector and segment (F+)
- How to work out perimeter
- Angle rules
- Angles in polygons
Prepare your KS4 students for maths GCSEs success with Third Space Learning. Weekly online one to one GCSE maths revision lessons delivered by expert maths tutors.
Find out more about our GCSE maths revision programme.
We use essential and non-essential cookies to improve the experience on our website. Please read our Cookies Policy for information on how we use cookies and how to manage or change your cookie settings.Accept
Privacy & Cookies Policy